Seventh aiCAMstir Meeting, 26 January 2023: Difference between revisions
Line 33: | Line 33: | ||
!Attendee !! Company !! Status !! Signed-up on | !Attendee !! Company !! Status !! Signed-up on | ||
|- | |- | ||
|Adrian Gerlich || | |Adrian Gerlich || Waterloo University, Canada || Guest || | ||
|- | |- | ||
|Azman Ismail || Universiti Kuala Lumpur, Malaysia || Guest || | |Azman Ismail || Universiti Kuala Lumpur, Malaysia || Guest || |
Revision as of 04:39, 4 February 2023
The Seventh aiCAMstir Meeting was held online on 26 January 2023 with 39 attendees.
Link to the video
Recording of the Seventh aiCAMstir Meeting (Total: 1:42 h, the first presentation starts at 15:55 min) |
Agenda
The agenda of the 90 min long on-line meeting was as follows:
- Welcome and introduction (2-3 sentences each)
- Development of a new stitch friction stir welding gun and mechanical behavior of intersecting stitch welded AA 6016-T4 sheets. Dominik Walz, MPA Stuttgart, Germany (20 min + 5 min questions)
- Effect of FSW tool geometry on the joint quality of AA2024-T3/AA7075T6 joints in butt configuration. Reza Beygi, INEGI, Porto, Portugal (20 min + 5 min questions)
- Machine investment cost and tool wear of friction stir welding of battery trays of compact crossovers. Stephan Kallee, AluStir, Germany (20 min + 5 min questions)
- Collaborative projects, organisational comments and date of next meeting (25 May 2023). Mike Lewis (FTS Engineering Answers Ltd)
List of Attendees
(alphabetically sorted by first name or MS-Teams name)
Attendee | Company | Status | Signed-up on |
---|---|---|---|
Adrian Gerlich | Waterloo University, Canada | Guest | |
Azman Ismail | Universiti Kuala Lumpur, Malaysia | Guest | |
Breno Boretti Galizoni | Sonaca, Brazil | Guest | |
Carlos Santos | Mazak, USA | Guest | |
Christian Vogrinec | Saman Ventures, Austria | Guest | |
Christian Barth | CERN, Genève, Switzerland | Guest | |
Christoph Rößler | Sampro Software, Germany | Guest | |
Christoph Barth | Toolcraft, Germany | Guest | |
Dominik Walz | MPA Stuttgart, Germany | Guest | |
Egoitz Aldanondo | IK4-LORTEK, Spain | Guest | |
Elizabeth Hoyos Pulgarín | Universidad EIA, Colombia | Guest | |
Fabian Vieltorf | Technical University Munich, Germany | Guest | |
François Nadeau | NRC Canada, Canada | Guest | |
Fritz Luidhardt | Harms + Wende, Germany | Guest | |
Henrik Blicher Schmidt | HBS Engineering, Denmark | Guest | |
Ingo Hahn | Hexagon, Germany | Guest | |
Javier Vivas Mendez | IK4-LORTEK, Spain | Guest | |
Jean Pierre Bergmann | Technische Universität Ilmenau | Guest | |
João Gandra | ESA, Netherlands | Guest | |
John Hunt | TWB, USA | Guest | |
Jürgen Silvanus | Airbus, Germany | Guest | |
Mario Leitner | Stirline GmbH, Austria | Industrial Company | 2022-03-02 |
Markus Graß | Uni Kassel, Germany | Guest | |
Markus Weigl | Grenzebach, Germany | Guest | |
Martin McDonnell | U.S. Army, TARDEC, USA | Guest | |
Matthew Hackett | Element 6, UK | Guest | |
Michael Eff | EWI, USA | Guest | |
Michael Hasieber | Technical University Ilmenau, Germany | Guest | |
Michael Zäh | Technical University of Munich, Germany | Guest | |
Mike Lewis | FTS Engineering Answers Ltd, UK | Consultancy service provider | 2021-01-14 |
Nguon-Nhan Bui | Harms + Wende, Germany | Guest | |
Niklas Harriehausen | Sampro Software, Germany | Guest | |
Stephan Kallee | AluStir, Germany | Consultancy service provider | 2021-01-14 |
Patrick, Mubiayi Mukuna | University of South Africa, South Africa | Guest | |
Reinhard Mauermann | Fraunhofer IWU, Germany | Guest | |
Reza Beygi | INEGI, Spain | Guest | |
Sahin Sünger | Grenzebach, Germany | Guest | |
Simon Smith | Transforming Stress Ltd, UK | Consultancy service provider | 2021-01-14 |
Tim Haynie | Bond Technologies Inc., USA | Industrial Company | 2022-02-09 |
Presentations
Development of a new stitch friction stir welding gun and mechanical behavior of intersecting stitch welded AA 6016-T4 sheets. Dominik Walz, MPA Stuttgart, Germany, start at 15:55 min
Effect of FSW tool geometry on the joint quality of AA2024-T3/AA7075T6 joints in butt configuration. Reza Beygi, INEGI, Porto, Portugal, start at 39:50 min
Machine investment cost and tool wear of friction stir welding of battery trays of compact crossovers. Stephan Kallee, AluStir, Germany, start at 1:04:38 h
A video recording of this online meeting is available via the following link:
Recording of the Seventh aiCAMstir Meeting (Total: 1:45 h, the first presentation starts at 0:10:16 h) |
Literature
- [WAL23] Dominik Walz, Robin Göbel, Martin Werz and Stefan Weihe: Effect of Weld Length on Strength, Fatigue Behaviour and Microstructure of Intersecting Stitch-Friction Stir Welded AA 6016-T4 Sheets. https://doi.org/10.3390/ma16020533.
- [BYO11] Badarinarayan, H.; YANG, Q.; Okamoto, K. Effect of weld orientation on static strength and failure mode of friction stir
stitch welds in lap-shear specimens of aluminium 6022-T4 sheets. Fatigue & Fracture of Engineering Materials & Structures 2011, 34, 908– 920. https://doi.org/10.1111/j.1460-2695.2011.01584.x
- [OHH05] Okamoto, K.; Hunt, F.; Hirano, S. Development of Friction Stir Welding Technique and Machine for Aluminum Sheet Metal 261
Assembly- Friction Stir Welding of Aluminum for Automotive Applications (2) -. In Proceedings of the SAE Technical 262 Paper Series. SAE International400 Commonwealth Drive, Warrendale, PA, United States, 2005, SAE Technical Paper Series. 263 https://doi.org/10.4271/2005-01-1254
- [HBO06] Hunt, F.; Badarinarayan, H.; Okamoto, K. Design of Experiments for Friction Stir Stitch Welding of Aluminum Alloy 6022- 265
T4 - Friction Stir Welding of Aluminum for Automotive Applications (3) -. In Proceedings of the SAE Technical Paper 266 Series. SAE International400 Commonwealth Drive, Warrendale, PA, United States, 2006, SAE Technical Paper Series. https: 267//doi.org/10.4271/2006-01-0970.
- [SVN19] Suresh, S.; Venkatesan, K.; Natarajan, E.; Rajesh, S.; Lim, W.H. Evaluating weld properties of conventional and swept friction stir 272
spot welded 6061-T6 aluminium alloy. Materials Express 2019, 9, 851–860. https://doi.org/10.1166/mex.2019.1584.
- [Sat02] Sato, Y.S.; Urata, M.; Kokawa, H. Parameters controlling microstructure and hardness during friction-stir welding of precipitation- 297
hardenable aluminum alloy 6063. Metallurgical and Materials Transactions A 2002, 33, 625–635. https://doi.org/10.1007/s11661-0 298 02-0124-3.
- [Rod09] Rodrigues, D.M.; Loureiro, A.; Leitao, C.; Leal, R.M.; Chaparro, B.M.; Vilaça, P. Influence of friction stir welding parameters 300
on the microstructural and mechanical properties of AA 6016-T4 thin welds. Materials & Design 2009, 30, 1913–1921. https://doi.org/10.1016/j.matdes.2008.09.016.
Next meeting
We want to invite you to attend the Eighth online aiCAMstir Meeting on using artificial intelligence in Computer Aided Manufacture of friction stir welds. The meeting will be held on Thursday, 25 May 2023, 16:00 - 17:30 (London), as shown on upcoming events.
Please contact stephan.kallee@alustir.com, if you want to attend the meeting and/or if you want to participate in the project.