All public logs
Jump to navigation
Jump to search
Combined display of all available logs of aicamstir.com. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 17:00, 25 June 2022 Stephan Kallee at AluStir talk contribs created page User:Raheem Al-Sabur (Created page with " == Publications == * Raheem Al-Sabur, Hassanein I. Khalaf, Aleksandra Świerczyńska, Grzegorz Rogalski and Hesamoddin Aghajani Derazkola: [https://...")
- 16:55, 25 June 2022 Stephan Kallee at AluStir talk contribs changed group membership for Raheem Al-Sabur from (none) to Project_Participant
- 15:55, 25 June 2022 User account Raheem Al-Sabur talk contribs was created
- 09:23, 18 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Screenshot of the 5th aiCAMstir Meeting, © Mike Lewis, CC BY-SA 4.0.jpg (Screenshot of the 5th aiCAMstir Meeting, © Mike Lewis, CC BY-SA 4.0)
- 09:23, 18 June 2022 Stephan Kallee at AluStir talk contribs created page File:Screenshot of the 5th aiCAMstir Meeting, © Mike Lewis, CC BY-SA 4.0.jpg (Screenshot of the 5th aiCAMstir Meeting, © Mike Lewis, CC BY-SA 4.0)
- 23:49, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-015.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:49, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-015.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:31, 9 June 2022 Stephan Kallee at AluStir talk contribs created page Fifth aiCAMstir Meeting, 9 June 2022 (Created page with "The '''Fifth aiCAM<sup>''stir''</sup> Meeting''' was held online on 9 June 2022 with 20 attendees. 400px <!-- == Link to the...")
- 23:18, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-023.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:18, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-023.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:18, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-022.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:18, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-022.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:18, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-021.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:18, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-021.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:18, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-020.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:18, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-020.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:17, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-019.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:17, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-019.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:17, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-018.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:17, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-018.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:17, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-017.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:17, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-017.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:16, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-016.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:16, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-016.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:16, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-015.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:16, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-015.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:16, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-014.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:16, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-014.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:16, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-013.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:16, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-013.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:15, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-012.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:15, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-012.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:15, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-011.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:15, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-011.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:15, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-010.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:15, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-010.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:14, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-009.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:14, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-009.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:14, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-008.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:14, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-008.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:14, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-007.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:14, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-007.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:14, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-006.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:14, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-006.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:13, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-005.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:13, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-005.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:13, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-004.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:13, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-004.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:13, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-003.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:13, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-003.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:12, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-002.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Diringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:12, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-002.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Diringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:12, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:Fraunhofer IPA Current Researches-page-001.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Diringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:12, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:Fraunhofer IPA Current Researches-page-001.jpg (Sascha Stribick and Erik Dieringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation: ''Current Researches at Fraunhofer IPA for Friction Stir Welding of Plastics.'' aiCAMstir online meeting, 9 June 2022, © Sascha Stribick and Erik Diringer, Fraunhofer Institute for Manufacturing, Engineering and Automatisation, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:08, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-021.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:08, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-021.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:07, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-020.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:07, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-020.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:07, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-019.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:07, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-019.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:07, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-018.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:07, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-018.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:07, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-017.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:07, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-017.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:06, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-016.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:06, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-016.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:06, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-014.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:06, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-014.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:06, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-013.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:06, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-013.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:06, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-012.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:06, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-012.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:05, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-011.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:05, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-011.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:05, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-010.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:05, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-010.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:05, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-009.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:05, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-009.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:05, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-008.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:05, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-008.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:04, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-007.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:04, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-007.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:04, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-006.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:04, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-006.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:04, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-005.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:04, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-005.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:03, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-004.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:03, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-004.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:03, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-003.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:03, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-003.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:03, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-002.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:03, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-002.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:02, 9 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMStir 09062022 MGUILLO-page-001.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 23:02, 9 June 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMStir 09062022 MGUILLO-page-001.jpg (Mario Guillo, PhD-Eng: ''SmartUniversalSpindle for Robot: FSW, Stationary Shoulder FSW and Milling Application with a unique robot installation.'' aiCAMstir online meeting, 9 June 2022, © Mario Guillo, Institut Maupertuis, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:34, 7 June 2022 Stephan Kallee at AluStir talk contribs created page User:Emrekaygusuz (Created page with "== Publications == * Çakan, A., Ugurlu, M., Kaygusuz, E. (2019): ''Effect of weld parameters on the microstructure and mechanical properties of dissimilar friction stir joint...")
- 12:42, 7 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:FSW of 3mm thick Al 7075T6 to pure copper, DSC 0045, © Emre Kaygusuz, Bingöl University, CC BY-SA 4.0.JPG (FSW of 3mm thick Al 7075T6 to pure copper, © Emre Kaygusuz, Bingöl University, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 12:42, 7 June 2022 Stephan Kallee at AluStir talk contribs created page File:FSW of 3mm thick Al 7075T6 to pure copper, DSC 0045, © Emre Kaygusuz, Bingöl University, CC BY-SA 4.0.JPG (FSW of 3mm thick Al 7075T6 to pure copper, © Emre Kaygusuz, Bingöl University, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 12:42, 7 June 2022 Stephan Kallee at AluStir talk contribs created page File:FSW of 3mm thick Al 7075T6 to pure copper, DSC 0041, © Emre Kaygusuz, Bingöl University, CC BY-SA 4.0.JPG (FSW of 3mm thick Al 7075T6 to pure copper, © Emre Kaygusuz, Bingöl University, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 12:42, 7 June 2022 Stephan Kallee at AluStir talk contribs uploaded File:FSW of 3mm thick Al 7075T6 to pure copper, DSC 0041, © Emre Kaygusuz, Bingöl University, CC BY-SA 4.0.JPG (FSW of 3mm thick Al 7075T6 to pure copper, © Emre Kaygusuz, Bingöl University, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 11:51, 7 June 2022 Stephan Kallee at AluStir talk contribs changed group membership for Emrekaygusuz from (none) to Project_Participant (As discussed and requested by E-Mail)
- 11:46, 7 June 2022 Stephan Kallee at AluStir talk contribs changed group membership for Gökhan from (none) to Project_Participant (As discussed and requested by E-Mail)
- 22:00, 6 June 2022 User account Emrekaygusuz talk contribs was created
- 17:14, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-26.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:14, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-26.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:14, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-14.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:14, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-14.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:13, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-07.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:13, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-07.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:05, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-30.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:05, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-30.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:04, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-29.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:04, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-29.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:04, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-28.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:04, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-28.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:04, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-27.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:04, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-27.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:04, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-25.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:04, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-25.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:03, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-24.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:03, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-24.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:03, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-23.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:03, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-23.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:03, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-22.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:03, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-22.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:02, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-21.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:02, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-21.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:02, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-20.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:02, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-20.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:02, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-19.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:02, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-19.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:02, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-18.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:02, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-18.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:01, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-17.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:01, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-17.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:01, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-16.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:01, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-16.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:01, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-15.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:01, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-15.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:01, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-13.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:01, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-13.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:00, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-12.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:00, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-12.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:00, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-11.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:00, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-11.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:00, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-10.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:00, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-10.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:00, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-03.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 17:00, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-03.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:59, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-09.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:59, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-09.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:59, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-08.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:59, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-08.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:59, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-06.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:59, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-06.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:59, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-05.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:59, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-05.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:58, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-04.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:58, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-04.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:58, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-02.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:58, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-02.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:58, 5 April 2022 Stephan Kallee at AluStir talk contribs uploaded File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-01.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 16:58, 5 April 2022 Stephan Kallee at AluStir talk contribs created page File:M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann - Wear of FS(S)W tools and possibilities of process monitoring - aiCAMstir - 5 Apr 2022 - CC BY-SA 4.0-01.jpg (M. Hasieber, P. Pöthig, M. Grätzel, J.P. Bergmann: ''Wear of FS(S)W tools and possibilities of process monitoring,'' presented during the Fourth aiCAMstir Meeting, 10 March 2022, uploaded on 5 April 2022 under the Creative Commons licence [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0-01].)
- 12:15, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-22.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:15, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-22.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:14, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-21.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:14, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-21.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:14, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-20.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:14, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-20.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:14, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-19.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:14, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-19.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:13, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-18.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:13, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-18.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:13, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-17.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:13, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-17.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:13, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-16.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:13, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-16.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:13, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-15.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:13, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-15.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:12, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-14.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:12, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-14.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:12, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-13.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:12, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-13.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:12, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-12.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:12, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-12.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:12, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-11.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:12, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-11.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:11, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-10.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:11, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-10.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:11, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-09.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:11, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-09.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:11, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-08.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:11, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-08.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:10, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-07.jpg
- 12:10, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-07.jpg
- 12:10, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-06.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:10, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-06.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:10, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-04.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:10, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-04.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:09, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-03.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:09, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-03.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:09, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-02.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:09, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-02.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:09, 26 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:Introduction to Bond Technologies 2022 03 10-01.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 12:09, 26 March 2022 Stephan Kallee at AluStir talk contribs created page File:Introduction to Bond Technologies 2022 03 10-01.jpg (Tim Haynie (Bond Technologies Inc.): Products and Services of Bond. Slides presented at Fourth aiCAMstir Meeting, 10 March 2022.)
- 14:23, 23 March 2022 Stephan Kallee at AluStir talk contribs created page Aicamstir.com:Copyrights (Redirected page to Copyrights of aiCAMstir website) Tag: New redirect
- 11:57, 19 March 2022 Shubham Verma talk contribs uploaded File:FSW AA7039-AA5083.jpg (Friction stir welding of dissimilar aluminum alloys (AA7039-AA5083))
- 11:57, 19 March 2022 Shubham Verma talk contribs created page File:FSW AA7039-AA5083.jpg (Friction stir welding of dissimilar aluminum alloys (AA7039-AA5083))
- 11:35, 19 March 2022 Stephan Kallee at AluStir talk contribs created page User:Shubham Verma (Created page with "== Publications == * Shubham Verma, Meenu Gupta and Joy Prakash Misra: [https://www.sciencedirect.com/science/article/pii/S2215016118301444?via%3Dihub ''Performance evaluatio...")
- 11:10, 19 March 2022 Stephan Kallee at AluStir talk contribs changed group membership for Shubham Verma from (none) to Project_Participant
- 05:21, 19 March 2022 User account Shubham Verma talk contribs was created
- 12:36, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-15 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:36, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-15 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:36, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-14 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:36, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-14 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:36, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-13 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:36, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-13 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:36, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-12 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:36, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-12 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:35, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-11 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:35, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-11 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:35, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-10 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:35, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-10 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:35, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-09 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:35, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-09 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:35, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-08 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:35, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-08 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:34, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-07 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:34, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-07 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:34, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-06 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:34, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-06 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:34, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-05 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:34, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-05 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:33, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-04 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:33, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-04 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:33, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-03 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:33, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-03 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:33, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-02 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:33, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-02 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:33, 14 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:NRC - FSW NDE inspection final (10-03-2022)-01 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 12:33, 14 March 2022 Stephan Kallee at AluStir talk contribs created page File:NRC - FSW NDE inspection final (10-03-2022)-01 © François Nadeau, CNRC-NRC, CC BY-SA 4.0.jpg (NRC - FSW NDE inspection_final (10-03-2022) © François Nadeau, CNRC-NRC, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons licence CC BY-SA 4.0])
- 19:21, 12 March 2022 Stephan Kallee at AluStir talk contribs uploaded a new version of File:005 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Ellipse removed)
- 18:42, 12 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:005 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:42, 12 March 2022 Stephan Kallee at AluStir talk contribs created page File:005 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:42, 12 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:004 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:42, 12 March 2022 Stephan Kallee at AluStir talk contribs created page File:004 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:41, 12 March 2022 Stephan Kallee at AluStir talk contribs created page File:003 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:41, 12 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:003 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:41, 12 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:002 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:41, 12 March 2022 Stephan Kallee at AluStir talk contribs created page File:002 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:41, 12 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:001 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:41, 12 March 2022 Stephan Kallee at AluStir talk contribs created page File:001 Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg.JPG (Fourth aiCAMstir meeting, 10 March 2022 © Mike Lewis, Stephan Kallee and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg)
- 18:28, 12 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:ISFSWP 2022.jpg (Screenshot of the invitation to the [https://ms.hereon.de/isfswp2022/index.php.en Joint International Symposium on Friction Stir Welding and Processing - ISFSWP 2022]. © Helmholtz-Zentrum hereon GmbH.)
- 18:28, 12 March 2022 Stephan Kallee at AluStir talk contribs created page File:ISFSWP 2022.jpg (Screenshot of the invitation to the [https://ms.hereon.de/isfswp2022/index.php.en Joint International Symposium on Friction Stir Welding and Processing - ISFSWP 2022]. © Helmholtz-Zentrum hereon GmbH.)
- 17:33, 12 March 2022 Stephan Kallee at AluStir talk contribs created page Fourth aiCAMstir Meeting, 10 March 2022 (Created page with "The '''Fourth aiCAM<sup>''stir''</sup> Meeting''' was held online on 10 March 2022 with 30 attendees. 400px == Link to the vi...")
- 16:54, 2 March 2022 Stephan Kallee at AluStir talk contribs moved page File:AiCAMstir concept for friction using shearography and artificial intelligence in friction stir welding, © Stephan Kallee, © Tobias Klenze, © TheGrenzebachGroup, © Shearo CC-BY-SA 4.0.jpg to File:AiCAMstir concept for friction using shearography and artificial intelligence in friction stir welding, © Stephan Kallee, © TheGrenzebachGroup, © Shearo CC-BY-SA 4.0.jpg without leaving a redirect (Copy and paste error)
- 16:43, 2 March 2022 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir concept for friction using shearography and artificial intelligence in friction stir welding, © Stephan Kallee, © Tobias Klenze, © TheGrenzebachGroup, © Shearo CC-BY-SA 4.0.jpg (aiCAMstir concept for friction using shearography and artificial intelligence in friction stir welding, © Stephan Kallee [https://creativecommons.org/licenses/by-sa/4.0/deed.de CC-BY-SA 4.0] using photos of © [https://commons.wikimedia.org/wiki/File:Friction_Stir_Welding_Grenzebach.JPG TheGrenzebachGroup], [https://creativecommons.org/licenses/by-sa/4.0/deed.de CC-BY-SA 4.0] © [https://commons.wikimedia.org/wiki/File:Steinbichler_Shearography_Mobile_Testing-Unit.jpg Shearo] [https://creativec...)
- 16:43, 2 March 2022 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir concept for friction using shearography and artificial intelligence in friction stir welding, © Stephan Kallee, © Tobias Klenze, © TheGrenzebachGroup, © Shearo CC-BY-SA 4.0.jpg (aiCAMstir concept for friction using shearography and artificial intelligence in friction stir welding, © Stephan Kallee [https://creativecommons.org/licenses/by-sa/4.0/deed.de CC-BY-SA 4.0] using photos of © [https://commons.wikimedia.org/wiki/File:Friction_Stir_Welding_Grenzebach.JPG TheGrenzebachGroup], [https://creativecommons.org/licenses/by-sa/4.0/deed.de CC-BY-SA 4.0] © [https://commons.wikimedia.org/wiki/File:Steinbichler_Shearography_Mobile_Testing-Unit.jpg Shearo] [https://creativec...)
- 10:10, 31 January 2022 Stephan Kallee at AluStir talk contribs changed group membership for Vipmasaeli from (none) to Project_Participant (As discussed by E-mail)
- 18:00, 17 December 2021 Stephan Kallee at AluStir talk contribs changed group membership for FNadeau from (none) to Project_Participant (As discussed during an online meeting)
- 11:09, 16 December 2021 Stephan Kallee at AluStir talk contribs changed group membership for Aoh from (none) to Project_Participant (As discussed by E-mail)
- 09:59, 7 December 2021 Stephan Kallee at AluStir talk contribs changed group membership for Mohamed Zaky from (none) to Project_Participant (As discussed by E-Mail)
- 17:44, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (IMG 1806a).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 17:44, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (IMG 1806a).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 17:43, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (flashing2).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 17:43, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (flashing2).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 17:43, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (flashing1).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 17:43, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (flashing1).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 17:43, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (flashing).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 17:43, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (flashing).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 17:42, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (weldA).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 17:42, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (weldA).jpg (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
- 15:39, 6 December 2021 Stephan Kallee at AluStir talk contribs changed group membership for Christian Paglia from (none) to Project_Participant (As discussed by E-mail)
- 15:30, 6 December 2021 Stephan Kallee at AluStir talk contribs moved page Surface Morphology to Surface morphology
- 15:28, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded a new version of File:Image processing of voids in FSW of Ni base alloy using GiMP 2.10 © Stephan Kallee and © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Highlighted in red)
- 15:13, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:Image processing of voids in FSW of Ni base alloy using GiMP 2.10 © Stephan Kallee and © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Image processing by Stephan Kallee using GIMP 2.1O of a Creative Commons licenced photo by Mohamed M. Z. Ahmed et al. == References == Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC...)
- 15:13, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:Image processing of voids in FSW of Ni base alloy using GiMP 2.10 © Stephan Kallee and © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Image processing by Stephan Kallee using GIMP 2.1O of a Creative Commons licenced photo by Mohamed M. Z. Ahmed et al. == References == Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC...)
- 14:05, 6 December 2021 Stephan Kallee at AluStir talk contribs created page Surface Morphology (Created page with "'''Surface morphology''' is a subset of analytical imaging to describe the macroscopic and microscopic appearance of the top surface friction stir welds In some cases, high s...")
- 13:48, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:WC-based composite tool during FSW of Ni base alloy © Mohamed M. Z. Ahmed, The Development of WC-Based Composite Tools for FSW Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 13:48, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:WC-based composite tool during FSW of Ni base alloy © Mohamed M. Z. Ahmed, The Development of WC-Based Composite Tools for FSW Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 13:48, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:FSW tool parts after consolidation, grinding for the required geometries and insertion in the tool steel holder © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 13:48, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:FSW tool parts after consolidation, grinding for the required geometries and insertion in the tool steel holder © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 13:47, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:FSW of Ni carbon steel using WC-Co-TaC-NbC tool with 2.5 wt-percent Y2O3 and 5 wt-percent Ni © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 13:47, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:FSW of Ni carbon steel using WC-Co-TaC-NbC tool with 2.5 wt-percent Y2O3 and 5 wt-percent Ni © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 13:47, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:FSW of Ni base alloy using WC-Co-TaC-NbC tool with 2.5 wt-percent Y2O3 and 5 wt-percent Ni © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 13:47, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:FSW of Ni base alloy using WC-Co-TaC-NbC tool with 2.5 wt-percent Y2O3 and 5 wt-percent Ni © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 13:45, 6 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:Friction stir welding of Ni base alloy using WC-Co-TaC-NbC tool with 2.5 wt-percent Y2O3 and 5 wt-percent Ni © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening�Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 13:45, 6 December 2021 Stephan Kallee at AluStir talk contribs created page File:Friction stir welding of Ni base alloy using WC-Co-TaC-NbC tool with 2.5 wt-percent Y2O3 and 5 wt-percent Ni © Mohamed M. Z. Ahmed et al, WC-Based Composite Tools for FSW. Metals 2021, 11, 285, CC BY 4.0.jpg (Mohamed M. Z. Ahmed, Waheed S. Barakat, Abdelkarim Y. A. Mohamed 3, Naser A. Alsaleh and Omayma A. Elkady: The Development of WC-Based Composite Tools for Friction Stir Welding of High-Softening�Temperature Materials. Metals 2021, 11, 285, [https://doi.org/10.3390/met11020285 https://doi.org/10.3390/met11020285], [https://creativecommons.org/licenses/by/4.0/ CC BY 4.0] Short Citation: Ahmed, M.M.Z.; Barakat, W.S.; Y. A. Mohamed, A.; A. Alsaleh, N.; Elkady, O.A. The Development of WC-Based Co...)
- 22:27, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:003 Third aiCAMstir meeting, 2 Dec 2021 © Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg (Third aiCAMstir meeting, 2 Dec 2021,© Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com])
- 22:27, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:003 Third aiCAMstir meeting, 2 Dec 2021 © Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith, CC BY-SA 4.0 www.aicamstir.jpg (Third aiCAMstir meeting, 2 Dec 2021,© Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com])
- 15:32, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:42 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:32, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:42 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:32, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:41 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:32, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:41 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:32, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:40 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:32, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:40 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:32, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:39 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:32, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:39 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:31, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:38 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:31, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:38 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:31, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:37 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0,www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:31, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:37 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0,www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:31, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:36 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:31, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:36 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:31, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:35 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:31, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:35 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:30, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:34 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:30, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:34 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:30, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:33 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:30, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:33 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:30, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:32 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:30, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:32 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:29, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:31 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:29, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:31 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:29, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:30 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:29, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:30 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:29, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:29 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:29, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:29 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:29, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:28 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:29, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:28 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:28, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:27 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:28, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:27 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:28, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:26 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:28, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:26 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:28, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:25 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:28, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:25 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:27, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:24 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:27, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:24 Third aiCAMstir meeting, 2 Dec 2021 © Aymeric de Monclin, TRAC-C industrie, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMs<sup>''stir''</sup> meeting, 2 Dec 2021 © Aymeric de Monclin, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:18, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:23 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:18, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:23 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:17, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:22 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:17, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:22 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:17, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:21 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:17, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:21 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:16, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:20 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:16, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:20 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:16, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:19 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:16, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:19 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:16, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:18 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:16, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:18 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:16, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:17 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:16, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:17 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:15, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:16 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:15, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:16 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:15, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:15 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:15, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:15 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:15, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:14 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 15:15, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:14 Third aiCAMstir meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, CC BY-SA 4.0, www www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Ricardo C. Jaques, LAMEF, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:57, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:12 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:57, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:12 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:56, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:13 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:56, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:13 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:56, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:11 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:56, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:11 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:55, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:10 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:55, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:10 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:55, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:09 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:55, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:09 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:55, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:08 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:55, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:08 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:55, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:07 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:55, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:07 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:54, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:06 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:54, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:06 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:54, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:05 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:54, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:05 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:54, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:04 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:54, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:04 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAM<sup>''stir''</sup> meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:52, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:03 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:52, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:03 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www-aiCAMstir-com.JPG (Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:37, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:02 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www aiCAMstir com.JPG (Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:37, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:02 Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, CC BY-SA 4.0, www aiCAMstir com.JPG (Third aiCAMstir meeting, 2 Dec 2021 © Yuri Hovanski, Brigham Young University, [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:28, 3 December 2021 Stephan Kallee at AluStir talk contribs uploaded File:01 Third aiCAMstir meeting, 2 Dec 2021 © Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith, CC BY-SA 4.0 aicamstir.JPG (Third aiCAMstir meeting, 2 Dec 2021,© Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 14:28, 3 December 2021 Stephan Kallee at AluStir talk contribs created page File:01 Third aiCAMstir meeting, 2 Dec 2021 © Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith, CC BY-SA 4.0 aicamstir.JPG (Third aiCAMstir meeting, 2 Dec 2021,© Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith [https://creativecommons.org/licenses/by-sa/4.0/ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)], [https://aicamstir.com/|www.aicamstir.com])
- 12:40, 3 December 2021 Stephan Kallee at AluStir talk contribs created page Third aiCAMstir Meeting, 2 December 2021 (Created page with "The '''Third aiCAM<sup>''stir''</sup> Meeting''' was held online on 2 December 2021 with 16 attendees. == Link to the video == {| width=100% cellpadding="0" cellspacing="0" v...")
- 12:25, 15 November 2021 Stephan Kallee at AluStir talk contribs changed group membership for Landry from (none) to Project_Participant (As discussed by E-mail)
- 13:12, 27 October 2021 Stephan Kallee at AluStir talk contribs changed group membership for JACKY from (none) to Project_Participant (As discussed by E-mail)
- 19:40, 13 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Concept for Long Range Ultrasonic Testing or Phased Array Ultrasonic Testing during Orbital Welding of Pipelines © Stephan Kalleee, CC BY-SA 4.0 using photo of Bundesanstalt für Wasserbau, CC BY 2.0.jpg (aiCAMstir Concept for Long Range Ultrasonic Testing or Phased Array Ultrasonic Testing during Orbital Welding of Pipelines © Stephan Kalleee, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] using [https://commons.wikimedia.org/wiki/File:Lotsenstationsschiff_ELBE_(42579621175).jpg photo of Bundesanstalt für Wasserbau], [https://creativecommons.org/licenses/by/2.0/deed.de CC BY 2.0])
- 19:40, 13 October 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Concept for Long Range Ultrasonic Testing or Phased Array Ultrasonic Testing during Orbital Welding of Pipelines © Stephan Kalleee, CC BY-SA 4.0 using photo of Bundesanstalt für Wasserbau, CC BY 2.0.jpg (aiCAMstir Concept for Long Range Ultrasonic Testing or Phased Array Ultrasonic Testing during Orbital Welding of Pipelines © Stephan Kalleee, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] using [https://commons.wikimedia.org/wiki/File:Lotsenstationsschiff_ELBE_(42579621175).jpg photo of Bundesanstalt für Wasserbau], [https://creativecommons.org/licenses/by/2.0/deed.de CC BY 2.0])
- 19:38, 13 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Concept for Long Range Ultrasonic Testing or Phased Array Ultrasonic Testing during Orbital Welding of Pipelines © Stephan Kallee CC BY 4.0 using a photo of X Niu et al, CC BY 3.0.jpg (aiCAMstir Concept for Long Range Ultrasonic Testing or Phased Array Ultrasonic Testing during Orbital Welding of Pipelines © Stephan Kallee [https://creativecommons.org/licenses/by-sa/4.0/ CC BY 4.0] using a photo of [http://iopscience.iop.org/article/10.1088/1742-6596/1065/22/222006/pdf X Niu et al], [https://creativecommons.org/licenses/by/3.0/ CC BY 3.0])
- 19:38, 13 October 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Concept for Long Range Ultrasonic Testing or Phased Array Ultrasonic Testing during Orbital Welding of Pipelines © Stephan Kallee CC BY 4.0 using a photo of X Niu et al, CC BY 3.0.jpg (aiCAMstir Concept for Long Range Ultrasonic Testing or Phased Array Ultrasonic Testing during Orbital Welding of Pipelines © Stephan Kallee [https://creativecommons.org/licenses/by-sa/4.0/ CC BY 4.0] using a photo of [http://iopscience.iop.org/article/10.1088/1742-6596/1065/22/222006/pdf X Niu et al], [https://creativecommons.org/licenses/by/3.0/ CC BY 3.0])
- 12:52, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Agenda of the Second aiCAMstir meeting on 30 Sept 2021.jpg (Second aiCAMstir meeting, 30 September 2021 © Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith, www.aicamstir.com)
- 12:52, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Agenda of the Second aiCAMstir meeting on 30 Sept 2021.jpg (Second aiCAMstir meeting, 30 September 2021 © Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith, www.aicamstir.com)
- 12:34, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Screenshot - Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy, 30 September 2021.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:34, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Screenshot - Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy, 30 September 2021.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:29, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -08.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:29, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -08.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:22, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -10.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:22, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -10.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:21, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -09.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:21, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -09.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:21, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -07.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:21, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -07.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:21, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -06.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:21, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -06.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:20, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -05.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:20, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -05.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:20, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -04.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:20, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -04.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:20, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -03.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:20, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -03.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:19, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -02.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:19, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -02.jpg (''Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy.'' September 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareA...)
- 12:18, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Apresentação artigo FSW -01.jpg (Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy, Septmber 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike...)
- 12:18, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Apresentação artigo FSW -01.jpg (Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy, Septmber 2021 © Dr. Guilherme Vieira Braga Lemos, MSc. Nicole Monique Brum Walter and MSc. Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, presented at the Second aiCAMstir Meeting on 30 September 2021 under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike...)
- 11:31, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-18.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:31, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-18.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:30, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-17.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:30, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-17.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:30, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-16.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:30, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-16.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:30, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-15.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:30, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-15.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:29, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-14.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:29, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-14.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:29, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-13.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:29, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-13.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:29, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-12.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:29, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-12.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:29, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-11.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:29, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-11.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:28, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-10.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:28, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-10.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:28, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-09.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:28, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-09.jpg (Mike Lewis and Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:27, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-08.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:27, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-08.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:27, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-07.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:27, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-07.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:27, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-06.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:27, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-06.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:26, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-05.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:26, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-05.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:26, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-04.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:26, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-04.jpg (Mike Lewis and User:Simon Smith:Simon Smith: ''CFD of FSW (Computional Fluid Dynamics of Friction Stir Welding)'' © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:25, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-03.jpg (Mike Lewis: ''CFD of FSW'' (Computional Fluid Dynamics of Friction Stir Welding) © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:25, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-03.jpg (Mike Lewis: ''CFD of FSW'' (Computional Fluid Dynamics of Friction Stir Welding) © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:24, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-02.jpg (Mike Lewis: ''CFD of FSW'' (Computional Fluid Dynamics of Friction Stir Welding) © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:24, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-02.jpg (Mike Lewis: ''CFD of FSW'' (Computional Fluid Dynamics of Friction Stir Welding) © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:24, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:AICAMSTIR-20210930-Meeting-01.jpg (Mike Lewis: ''CFD of FSW'' (Computional Fluid Dynamics of Friction Stir Welding) © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:24, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:AICAMSTIR-20210930-Meeting-01.jpg (Mike Lewis: ''CFD of FSW'' (Computional Fluid Dynamics of Friction Stir Welding) © FTS Engineering Answers Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0)], [https://aicamstir.com/ www.aicamstir.com], 30 September 2021)
- 11:01, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:2nd Meeting 02 Screen Shot.jpg ([[File:2nd Meeting 01 Title Slide.jpg|thumb|left|upright=3.2|alt=Title Slide of the aiCAMstir Kick-off Meeting.|Agenda of the aiCAM<sup>''stir''</sup> Kick-off Meeting: <br />)
- 11:01, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:2nd Meeting 02 Screen Shot.jpg ([[File:2nd Meeting 01 Title Slide.jpg|thumb|left|upright=3.2|alt=Title Slide of the aiCAMstir Kick-off Meeting.|Agenda of the aiCAM<sup>''stir''</sup> Kick-off Meeting: <br />)
- 10:58, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:2nd Meeting 01 Title Slide.jpg (Second aiCAMstir meeting, 30 September 2021 © Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith, www.aicamstir.com)
- 10:58, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:2nd Meeting 01 Title Slide.jpg (Second aiCAMstir meeting, 30 September 2021 © Josselin Guillozet, Stephan Kallee, Mike Lewis and Simon Smith, www.aicamstir.com)
- 09:41, 6 October 2021 Stephan Kallee at AluStir talk contribs created page Second aiCAMstir Meeting, 30 September 2021 (Created page with "'''#### Work in progress - Please visit this page at a later stage ###'''' The '''Second aiCAM<sup>''stir''</sup> Meeting''' was held online on 30 September 2021 with ## atte...")
- 08:45, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Friction stir welding (LAMEF, UFRGS), Set 2021, 07.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:45, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Friction stir welding (LAMEF, UFRGS), Set 2021, 07.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:45, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Friction stir welding (LAMEF, UFRGS), Set 2021, 06.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:45, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Friction stir welding (LAMEF, UFRGS), Set 2021, 06.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:43, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Friction stir welding (LAMEF, UFRGS), Set 2021, 08.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:43, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Friction stir welding (LAMEF, UFRGS), Set 2021, 08.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:42, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Friction stir welding (LAMEF, UFRGS), Set 2021, 05.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:42, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Friction stir welding (LAMEF, UFRGS), Set 2021, 05.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:42, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Friction stir welding (LAMEF, UFRGS), Set 2021, 04.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:42, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Friction stir welding (LAMEF, UFRGS), Set 2021, 04.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:42, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Friction stir welding (LAMEF, UFRGS), Set 2021, 03.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:42, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Friction stir welding (LAMEF, UFRGS), Set 2021, 03.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:41, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Friction stir welding (LAMEF, UFRGS), Set 2021, 02.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:41, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Friction stir welding (LAMEF, UFRGS), Set 2021, 02.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:41, 6 October 2021 Stephan Kallee at AluStir talk contribs uploaded File:Friction stir welding (LAMEF, UFRGS), Set 2021, 01.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 08:41, 6 October 2021 Stephan Kallee at AluStir talk contribs created page File:Friction stir welding (LAMEF, UFRGS), Set 2021, 01.JPG (Friction stir welding (LAMEF/UFRGS), Set 2021 © Renan Mensch Landell, Laboratório de Metalurgia Física – LAMEF, ProEng - Unidade EMBRAPII, Universidade Federal do Rio Grande do Sul – UFRGS, provided on 24 September 2021 under a available under a [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)].)
- 09:12, 26 September 2021 Stephan Kallee at AluStir talk contribs deleted page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 25 .JPG (As requested by the author)
- 09:12, 26 September 2021 Stephan Kallee at AluStir talk contribs deleted page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 27.JPG (As requested by the author)
- 09:11, 26 September 2021 Stephan Kallee at AluStir talk contribs deleted page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 24.JPG (As requested by the author)
- 09:11, 26 September 2021 Stephan Kallee at AluStir talk contribs deleted page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 19.JPG (As requested by the author)
- 13:36, 23 August 2021 Stephan Kallee at AluStir talk contribs uploaded File:Screenshot of ultrasonic examination by Sonaflex, © Pavel Pashkov, Nordinkraft AG, Creative Commons — Attribution-ShareAlike 4.0 International — CC BY-SA 4.0.png (Screenshot of ultrasonic examination by Sonaflex, e.g. for non destructive testing friction stir welds by PAUT-TOFD (Phased Array Ultrasonic Testing and Time of Flight Diffraction), © Pavel Pashkov, Nordinkraft AG, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons — Attribution-ShareAlike 4.0 International] — CC BY-SA 4.0)
- 13:36, 23 August 2021 Stephan Kallee at AluStir talk contribs created page File:Screenshot of ultrasonic examination by Sonaflex, © Pavel Pashkov, Nordinkraft AG, Creative Commons — Attribution-ShareAlike 4.0 International — CC BY-SA 4.0.png (Screenshot of ultrasonic examination by Sonaflex, e.g. for non destructive testing friction stir welds by PAUT-TOFD (Phased Array Ultrasonic Testing and Time of Flight Diffraction), © Pavel Pashkov, Nordinkraft AG, [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons — Attribution-ShareAlike 4.0 International] — CC BY-SA 4.0)
- 08:42, 14 August 2021 Stephan Kallee at AluStir talk contribs deleted page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 22.JPG (Deleted as requested by Renan Landell)
- 16:41, 30 July 2021 Stephan Kallee at AluStir talk contribs created page LAMEF (Created page with "thumb|upright=1.5|alt=|PHYSICAL METALLURGY LABORATORY (LAMEF) ''' LAMEF ''' is the Physical Metallurgy Labor...")
- 16:17, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 36.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 36 Screenshot © Stephan Kallee, Mike Lewis, Josselin Guillozet and Simon Smith, CC BY-SA 4.0)
- 16:17, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 36.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 36 Screenshot © Stephan Kallee, Mike Lewis, Josselin Guillozet and Simon Smith, CC BY-SA 4.0)
- 15:55, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 27.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 27 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 15:55, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 27.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 27 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 15:53, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 25 .JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 25 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 15:53, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 25 .JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 25 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 15:52, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 24.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 24 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 15:52, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 24.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 24 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 15:51, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 22.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 22 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 15:51, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 22.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 22 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 15:50, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 19.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 19 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 15:50, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 19.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 19 <br/> Friction Stir Welding (LAMEF/UFRGS) <br/> © Renan Landell and Guilherme V. B. Lemos, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:38, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 18.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 18 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:38, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 18.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 18 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:38, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 17.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 17 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:38, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 17.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 17 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:37, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 16.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 16 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:37, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 16.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 16 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:36, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 15.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 15 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:36, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 15.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 15 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:36, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 14.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 14 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:36, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 14.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 14 <br/> Predictions of FSW Power <br/> © Simon Smith at Transforming Stress Ltd, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:20, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 13.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 13 <br/> Artificial Intelligence / Machine Learning <br/> © 2021 Sabe Technology Limited, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:20, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 13.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 13 <br/> Artificial Intelligence / Machine Learning <br/> © 2021 Sabe Technology Limited, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:18, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 12.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 12 <br/> Artificial Intelligence / Machine Learning <br/> © 2021 Sabe Technology Limited, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:18, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 12.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 12 <br/> Artificial Intelligence / Machine Learning <br/> © 2021 Sabe Technology Limited, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:02, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 11.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 11 <br/> FSW Simulation using CFD - Lap Weld <br/> © FTS Engineering Answers Limited, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:02, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 11.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 11 <br/> FSW Simulation using CFD - Lap Weld <br/> © FTS Engineering Answers Limited, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:01, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 10.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 10 <br/> FSW Simulation using CFD - Lap Weld <br/> © FTS Engineering Answers Limited, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 14:01, 30 July 2021 Stephan Kallee at AluStir talk contribs created page File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 10.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 10 <br/> FSW Simulation using CFD - Lap Weld <br/> © FTS Engineering Answers Limited, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])
- 13:45, 30 July 2021 Stephan Kallee at AluStir talk contribs uploaded File:AiCAMstir Kick-off Meeting, 29th July 2021 - Slide 09.JPG (aiCAMstir Kick-off Meeting, 29th July 2021 - Slide 07 <br/> Vision <br/> © Stephan Kallee at AluStir, [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0])