Seventh aiCAMstir Meeting, 26 January 2023: Difference between revisions
Line 342: | Line 342: | ||
== Literature == | == Literature == | ||
* | * [BYO11] Badarinarayan, H.; YANG, Q.; Okamoto, K. Effect of weld orientation on static strength and failure mode of friction stir | ||
stitch welds in lap-shear specimens of aluminium 6022-T4 sheets. Fatigue & Fracture of Engineering Materials & Structures 2011, 34, 908– | |||
920. https://doi.org/10.1111/j.1460-2695.2011.01584.x | |||
* [OHH05] Okamoto, K.; Hunt, F.; Hirano, S. Development of Friction Stir Welding Technique and Machine for Aluminum Sheet Metal 261 | |||
Assembly- Friction Stir Welding of Aluminum for Automotive Applications (2) -. In Proceedings of the SAE Technical 262 | |||
Paper Series. SAE International400 Commonwealth Drive, Warrendale, PA, United States, 2005, SAE Technical Paper Series. 263 | |||
https://doi.org/10.4271/2005-01-1254 | |||
* [HBO06] Hunt, F.; Badarinarayan, H.; Okamoto, K. Design of Experiments for Friction Stir Stitch Welding of Aluminum Alloy 6022- 265 | |||
T4 - Friction Stir Welding of Aluminum for Automotive Applications (3) -. In Proceedings of the SAE Technical Paper 266 | |||
Series. SAE International400 Commonwealth Drive, Warrendale, PA, United States, 2006, SAE Technical Paper Series. | |||
https: 267//doi.org/10.4271/2006-01-0970. | |||
* [SVN19] Suresh, S.; Venkatesan, K.; Natarajan, E.; Rajesh, S.; Lim, W.H. Evaluating weld properties of conventional and swept friction stir 272 | |||
spot welded 6061-T6 aluminium alloy. Materials Express 2019, 9, 851–860. https://doi.org/10.1166/mex.2019.1584. | |||
* [Sat02] Sato, Y.S.; Urata, M.; Kokawa, H. Parameters controlling microstructure and hardness during friction-stir welding of precipitation- 297 | |||
hardenable aluminum alloy 6063. Metallurgical and Materials Transactions A 2002, 33, 625–635. https://doi.org/10.1007/s11661-0 298 | |||
02-0124-3. | |||
* [Rod09] Rodrigues, D.M.; Loureiro, A.; Leitao, C.; Leal, R.M.; Chaparro, B.M.; Vilaça, P. Influence of friction stir welding parameters 300 | |||
on the microstructural and mechanical properties of AA 6016-T4 thin welds. Materials & Design 2009, 30, 1913–1921. https: 301 | |||
//doi.org/10.1016/j.matdes.2008.09.016. | |||
== Next meeting == | == Next meeting == |
Revision as of 13:24, 27 January 2023
The Seventh aiCAMstir Meeting was held online on 26 January 2023 with 32 attendees.
Agenda
The agenda of the 90 min long on-line meeting was as follows:
- Welcome and introduction (2-3 sentences each)
- Development of a new stitch friction stir welding gun and mechanical behavior of intersecting stitch welded AA 6016-T4 sheets. Dominik Walz, MPA Stuttgart, Germany (20 min + 5 min questions)
- Effect of FSW tool geometry on the joint quality of AA2024-T3/AA7075T6 joints in butt configuration. Reza Beygi, INEGI, Porto, Portugal (20 min + 5 min questions)
- Machine investment cost and tool wear of friction stir welding of battery trays of compact crossovers. Stephan Kallee, AluStir, Germany (20 min + 5 min questions)
- Collaborative projects, organisational comments and date of next meeting (25 May 2023). Mike Lewis (FTS Engineering Answers Ltd)
Presentations
Development of a new stitch friction stir welding gun and mechanical behavior of intersecting stitch welded AA 6016-T4 sheets. Dominik Walz, MPA Stuttgart, Germany
[[File:Dominik Walz, Development of a new stitch FSW gun and mechanical behavior of intersecting stitch welded AA 6016-T4 sheets, aiCAMstir, 26 Jan 2023 © MPA Stuttgart-page-021.jpg|thumb|left|upright=3.2|alt=Dominik Walz (MPA Stuttgart), Development of a new stitch FSW gun and mechanical behavior of intersecting stitch welded AA 6016-T4 sheets, aiCAMstir, 26 Jan 2023|Literature (please scroll down)
Effect of FSW tool geometry on the joint quality of AA2024-T3/AA7075T6 joints in butt configuration. Reza Beygi, INEGI, Porto, Portugal
Machine investment cost and tool wear of friction stir welding of battery trays of compact crossovers. Stephan Kallee, AluStir, Germany
Literature
- [BYO11] Badarinarayan, H.; YANG, Q.; Okamoto, K. Effect of weld orientation on static strength and failure mode of friction stir
stitch welds in lap-shear specimens of aluminium 6022-T4 sheets. Fatigue & Fracture of Engineering Materials & Structures 2011, 34, 908– 920. https://doi.org/10.1111/j.1460-2695.2011.01584.x
- [OHH05] Okamoto, K.; Hunt, F.; Hirano, S. Development of Friction Stir Welding Technique and Machine for Aluminum Sheet Metal 261
Assembly- Friction Stir Welding of Aluminum for Automotive Applications (2) -. In Proceedings of the SAE Technical 262 Paper Series. SAE International400 Commonwealth Drive, Warrendale, PA, United States, 2005, SAE Technical Paper Series. 263 https://doi.org/10.4271/2005-01-1254
- [HBO06] Hunt, F.; Badarinarayan, H.; Okamoto, K. Design of Experiments for Friction Stir Stitch Welding of Aluminum Alloy 6022- 265
T4 - Friction Stir Welding of Aluminum for Automotive Applications (3) -. In Proceedings of the SAE Technical Paper 266 Series. SAE International400 Commonwealth Drive, Warrendale, PA, United States, 2006, SAE Technical Paper Series. https: 267//doi.org/10.4271/2006-01-0970.
- [SVN19] Suresh, S.; Venkatesan, K.; Natarajan, E.; Rajesh, S.; Lim, W.H. Evaluating weld properties of conventional and swept friction stir 272
spot welded 6061-T6 aluminium alloy. Materials Express 2019, 9, 851–860. https://doi.org/10.1166/mex.2019.1584.
- [Sat02] Sato, Y.S.; Urata, M.; Kokawa, H. Parameters controlling microstructure and hardness during friction-stir welding of precipitation- 297
hardenable aluminum alloy 6063. Metallurgical and Materials Transactions A 2002, 33, 625–635. https://doi.org/10.1007/s11661-0 298 02-0124-3.
- [Rod09] Rodrigues, D.M.; Loureiro, A.; Leitao, C.; Leal, R.M.; Chaparro, B.M.; Vilaça, P. Influence of friction stir welding parameters 300
on the microstructural and mechanical properties of AA 6016-T4 thin welds. Materials & Design 2009, 30, 1913–1921. https: 301 //doi.org/10.1016/j.matdes.2008.09.016.
Next meeting
We want to invite you to attend the Eight online aiCAMstir Meeting on using artificial intelligence in Computer Aided Manufacture of friction stir welds. The meeting will be held on Thursday, 25 May 2023, 16:00 - 17:30 (London), as shown on upcoming events.
Please contact stephan.kallee@alustir.com, if you want to attend the meeting and/or if you want to participate in the project.