File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (flashing2).jpg

From aicamstir.com
Revision as of 16:43, 6 December 2021 by Stephan Kallee at AluStir (talk | contribs) (© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file(864 × 576 pixels, file size: 91 KB, MIME type: image/jpeg)

Summary

© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons CC BY-SA 4.0

Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the rotation speed was 240 rpm.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current16:43, 6 December 2021Thumbnail for version as of 16:43, 6 December 2021864 × 576 (91 KB)Stephan Kallee at AluStir (talk | contribs)© Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...

The following page uses this file:

Metadata