File:Flash generation during FSW of 10mm thick aluminum alloy 7050 plates, © Christian Paglia, SUPSI, CC BY-SA 4.0 (IMG 1806a).jpg: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

6 December 2021

  • curprev 16:4416:44, 6 December 2021Stephan Kallee at AluStir talk contribs 543 bytes +543 © Christian Paglia, University of Applied Sciences of Southern Switzerland, licenced under Creative Commons [https://creativecommons.org/licenses/by-sa/4.0/ CC BY-SA 4.0] Flash generation during friction stir welding of cast AA-Scandium with pin rupture, flashing on one side, A: as-cast; 10mm thick aluminum alloy 7050-T651 plates (Al–5.6Zn–2.5Mg–1.6Cu) alloyed with 0.12 wt.% scandium were friction stir welded at a travel speed of 140 mm/min. The pin length was approximately 9.5 mm and the ro...