File:AiCAMstir AS-SWK TaM Three Welds © Stephan Kallee at AluStir, CC BY-SA 4.0 ROOT 2.01.jpg

From aicamstir.com
Jump to navigation Jump to search

Original file ‎(3,504 × 2,472 pixels, file size: 1.5 MB, MIME type: image/jpeg)

Summary

The roots of three friction stir welds made during Training at Munich (TaM). The start is at the right hand side the end at the left hand side. Parameters from top to bottom:

  • aiCAMstir AS-SWK TaM 000.003 5000 rpm 1000mm-min 7.6kN
  • aiCAMstir AS-SWK TaM 000.004 3000 rpm 1000mm-min 9.2kN
  • aiCAMstir AS-SWK TaM 000.005 1300 rpm 1000mm-min 9.8kN

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:13, 16 April 2021Thumbnail for version as of 12:13, 16 April 20213,504 × 2,472 (1.5 MB)Stephan Kallee at AluStir (talk | contribs)The roots of three friction stir welds made during Training at Munich (TaM). The start is at the right hand side the end at the left hand side. Parameters from top to bottom: *aiCAMstir AS-SWK TaM 000.003 5000 rpm 1000mm-min 7.6kN © Stephan Kallee at AluStir, CC BY-SA 4.0 *aiCAMstir AS-SWK TaM 000.004 3000 rpm 1000mm-min 9.2kN © Stephan Kallee at AluStir, CC BY-SA 4.0 *aiCAMstir AS-SWK TaM 000.005 1300 rpm 1000mm-min 9.8kN © Stephan Kallee at AluStir, CC BY-SA 4.0

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from ‘http:///index.php?title=File:AiCAMstir_AS-SWK_TaM_Three_Welds_©_Stephan_Kallee_at_AluStir,_CC_BY-SA_4.0_ROOT_2.01.jpg&oldid=321’