User:Raheem Al-Sabur

Raheem Al-Sabur PhD in mechanical engineering and a specialist in friction stir welding is a member of the American Welding Society (AWS) and the German Welding Society (DVS). Since 2002, a faculty staff member in the Mechanical Engineering Department at the University of Basrah (Iraq).

Publications

• Al-Sabur, R.; Khalaf, H.I.; ´ Swierczy´nska, A.; Rogalski, G.; Derazkola, H.A. Effects of Noncontact Shoulder Tool Velocities on Friction Stir Joining of Polyamide 6 (PA6). Materials 2022, 15, 4214. https://doi.org/10.3390/ma15124214

• Abdulbaseer S. Bahedh, Akshansh Mishra, Raheem Al-Sabur, Ahmad K. Jassim, Machine learning algorithms for prediction of penetration depth and geometrical analysis of weld in friction stir spot welding process, Metall. Res. Technol. 119, 305 (2022). https://doi.org/10.1051/metal/2022032

• Khalaf, H.I.; Al-Sabur, R.; Abdullah, M.E.; Kubit, A.; Derazkola, H.A. Effects of Underwater Friction Stir Welding Heat Generation on Residual Stress of AA6068-T6 Aluminum Alloy. Materials 2022, 15, 2223. https://doi.org/10.3390/ma15062223

• Mishra, Akshansh; Dixit, Devarrishi; Raheem Al-Sabur, Development of specially reinforced magnesium composites prepared by squeeze casting process, Res. Eng. Struct. Mater., 2021; 7(4): 635-646, http://dx.doi.org/10.17515/resm2021.319me0622tn

• Al-Sabur, R., Tensile strength prediction of aluminium alloys welded by FSW using response surface methodology–Comparative review. Materials Today: Proceedings, 2021. Proceedings, Volume 45, Part 6, 2021, Pages 4504-4510. https://doi.org/10.1016/j.matpr.2020.12.1001

• Al-Sabur, R., A.K. Jassim, and E. Messele, Real-time monitoring applied to optimize friction stir spot welding joint for AA1230 Al-alloys. Materials Today: Volume 42, Part 5, 2021, Pages 2018-2024, https://doi.org/10.1016/j.matpr.2020.12.253

• Asmare, A., R. Al-Sabur, and E. Messele, Experimental Investigation of Friction Stir Welding on 6061-T6 Aluminum Alloy using Taguchi-Based GRA. Metals, 2020. 10(11): p. 1480. https://doi.org/10.3390/met10111480

• Al-Sabur, R.K. and A.K. Jassim. Friction stir spot welding applied to weld dissimilar metals of AA1100 Al-alloy and C11000 copper. in IOP Conference Series: Materials Science and Engineering. 2018. IOP Publishing. https://doi.org/10.1088/1757-899X/455/1/012087

• Jassim, A.K. and R.K. Al-Sabur, Studying the possibility to weld AA1100 aluminum alloy by friction stir spot welding. WorldAcademy of Science Engineering and Technology International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 2017. 11(9): p. 635-640.